DISK CONCENTRATE
- cleaning of car discs from corrosion and salt deposits
Concentrated agent for contact cleaning of ferrous and non-ferrous metal car discs from corrosion and salt deposits. Is recommended for removal of rust, oxide, salt films from ferrous and non-ferrous metals.
Does not cause harm to treated surfaces.
PROFESSIONAL ACID-BASED DETERGENT (pH 3)
METHOD OF APPLICATION:
- Prepare the working solution in a clean container (at least 200 ml, maximum concentrate volume per 1 liter of water – 300 ml).
- Spray the ready-made solution onto the surface to be cleaned with a trigger or a pump sprayer.
- Keep for 3-5 minutes.
- Rub with a brush and rinse with water.
- Repeat treatment if necessary.
Purpose |
Liquid concentrated acid foam detergent intended to remove rust, oxide and salt films from ferrous and non-ferrous metals. |
Areas of application |
Intended for contact cleaning of ferrous and non-ferrous discs from traces of corrosion and salt deposits. Recommended for professional use only. |
General guidelines and dosage |
Working solution concentrations – 1/10-1/20. The working solution shall be prepared by dilution with water in a plastic container, applied to contaminated surfaces with a trigger or brush, with subsequent exposure for 5-15 minutes and flushing with a jet of water or with DAC. The product can be used at temperatures from 0оС to 35оС. Storage and transportation of the product can be carried out at temperatures from +45оС to -25оС. The product does not freeze, but should be shaken after storage at low temperatures. |
Composition |
Softened water, sulfamic acid, corrosion inhibitor, NAEI less than 5%. |
Technical data |
Appearance, odor – translucent liquid of color from light yellow to light brown, without a characteristic odor. Density – 1.23-1.26 g/cm3 Storage from -40оС to +40оС without freezing. Chemical character – non-ionic. Water solubility – complete at any ratio. pH of 1% solution 2±1 Ability to biodegradation – more than 90%. |
Safety |
Avoid using the product, the concentrate and working solution at temperatures below 0°C, on the skin, mucous membranes, clothes, stomach. Do not spray the product using DAC, foam generator, sprayer. Overexposure of the working solution and its drying on the surface of paints, aluminum and metallized parts, especially at temperatures above 25°C can lead to irreversible damage. |
The company was founded in 1996
tons of products are sold annually
We deliver goods to all regions of the Russian Federation, CIS, Europe and Turkey
More than 200 partners