TRAK
- non-contact cleaning of all types of surfaces in cars and public transport means
Liquid-concentrated dense-foam cleaner for contact-free cleaning of all types of surfaces from atmospheric and ground contamination. Ideal for removal of stubborn dirt. Provides good foaming. Easy to be rinsed.
Does not cause harm to treated surfaces.
PROFESSIONAL LOW-ALKALINE DETERGENT (pH 12)
METHOD OF APPLICATION:
- Prepare a working solution in a clean container at the following rate:
– foam generator – minimum 13 ml, maximum 17 ml of the concentrate per 1 liter of water;
– foam generator – minimum 140 ml, maximum 200 ml of the concentrate per 1 liter of water;
(the given limits of concentrate dosage depend on the degree of contamination of a surface to be cleaned).
- Pour the prepared working solution into the sprayer or the foam kit.
- Process the entire surface evenly with a clean high-pressure water jet from the distance of 10-15 cm at the angle of 90°, moving from bottom to top.
- Apply the foam to the surface, moving from bottom to top in order to avoid stains.
- Keep it for 2-3 minutes not allowing it to dry.
- Remove the foam with a high pressure water jet applying reciprocating movements for the range of 10-15 cm moving upwards from the bottom.
- Thoroughly rub the entire surface with plenty of low-pressure water moving from top to bottom.
- Dry lacquered and glossy surfaces with a moisture-absorbent suede or microfiber cloth.
|
Purpose |
Liquid-concentrated density-optimized cleaner with the dense foam for contact-free cleaning of all types of surfaces from atmospheric and ground contamination. |
|
Application variants |
For cleaning of trucks and public transportation means. Recommended for professional use only. |
|
General guidelines and dosage |
Can be used by applying active foam or aerosol on a vehicle at temperatures from +1°C to +40°C, with subsequent keeping for 5-7 minutes and washing with water using a washer with the pressure of up to 2MPa. In case of application it is allowed to use foam generators, sprayers (domestic atomizers), water pressure regulators. Working concentrations for foam generators and sprays are 1/60-1/80, and 1/5-1/7 for mountings. |
|
Composition |
Softened water, sodium phosphonates (P2O5 5-15%) and EDTA 5-15%, anionic surfactants 5-15%, NAEI 5-15%, carboxylates, silicates, solvent, dye. |
|
Technical data |
Appearance, odor – translucent medium viscous blue liquid with a slight alcoholic odor. |
|
Safety |
Avoid using of the product at temperatures below 0°C, getting the concentrate on the skin and contact of the working solution with mucous membranes. When using sprayers, use respiratory protection against alkaline aerosols (3M respirators). Do not allow getting into the stomach. Overexposure of the working solution and its drying on the surface of paints, aluminum and metallized parts, especially at temperatures above 25°C can lead to irreversible damage. |
The company was founded in 1996
tons of products are sold annually
We deliver goods to all regions of the Russian Federation, CIS, Europe and Turkey
More than 200 partners
